Onda Floor Lamp

Both share the same postmodern squiggle-base design language at different scales. Onda Floor Lamp (this fixture) — full-height sculptural statement, ⌀ 17" × H 59", multi-curve squiggle base + fabric drum shade in Beige/White/Black. Correct for living-room corners, bedroom nooks, reading zones — anywhere you want a floor-standing decorative anchor. Onda Table Lamp — compact bedside piece, ⌀ 14.1" × H 18.5", single-crest squiggle base + hand-pleated white linen shade. Correct for bedside tables, entryway consoles, small side tables. Pair the two together in the same room — floor + bedside — for coordinated Onda-Squiggle-Series composition. Both use E14 warm-white LED bulbs (included), plug-in convenience, same 4-plug options.

Bulb included. Every Onda Floor Lamp ships with a standard non-dimmable warm-white LED bulb pre-fitted in the E14 socket, calibrated to 2700K for correct warm-glow character through the fabric drum shade. Plug into the wall, press the inline switch, and the lamp works — no separate bulb purchase required. If you want to upgrade: the E14 socket accepts any standard E14 bulb (smaller-diameter candelabra base — not the larger E26/E27). For dimming, swap in a dimmable E14 warm-white LED. For vintage character, an E14 filament Edison bulb provides amber warm tones. Widely available at Home Depot, IKEA, Amazon, and any lighting retailer. Maximum 40W (or LED equivalent).

All three are plug-in floor lamps at different registers. Onda Floor (this fixture) — 1980s postmodern squiggle sculptural, ⌀ 17" × H 59", E14 warm-white LED (included), Beige/White/Black fabric drum shade. For sculptural statement corners in modern-eclectic interiors. Bendik Floor Lamp — 1970s Danish compact traditional, Ø 28.4" × H 59", E26/E27 warm-white LED (included), White/Beige/Coffee linen shade. For reading corners beside armchairs in warm-traditional interiors. Arco Floor Lamp — 1960s Italian arching overhead reach, W 47.2" × H 66.9", integrated LED 25W (fixed), Black/White powder-coat base. For overhead ambient above sofas/dining/bed in modern-minimalist interiors. Choose Onda for statement sculpture; Bendik for warm compact; Arco for overhead reach.

Yes. The squiggle base terminates in a weighted stabilising footplate that anchors the fixture to the floor — engineered heavy enough to counterbalance the multi-curve column and hold the fixture stable through daily use. The undulating S-curves are decorative in character but structural in engineering, with calibrated wave angles that maintain rigidity across the full 59" vertical rise without visible reinforcement. The fixture will not tip when brushed against or when someone reaches under the shade. Position the footplate flush on a flat solid floor (not on rugs that could rock under load). Supervise around small children who may pull on the shade or cord.

Yes with the correct combination. The pre-fitted bulb is non-dimmable, and the inline switch on the cord operates as on/off only. For dimming, swap the included bulb for a dimmable E14 warm-white LED bulb (widely available; check package for "dimmable" label), and plug the lamp into a wall outlet controlled by a triac-compatible wall dimmer (Lutron Diva and Caseta triac dimmers are known LED-compatible). At 40-60% brightness the fabric drum shade catches light at its most atmospheric register — particularly correct for evening reading or intimate living-room ambient.

No professional installation required. The Onda Floor Lamp ships in three main sections (weighted base + squiggle column + fabric drum shade with pre-fitted bulb) that assemble with basic hand tools — mounting hardware and clear illustrated instructions included. Typical assembly time is 15-25 minutes single-person. Once assembled, plug the cord into the nearest wall outlet with your selected region's plug, press the inline switch, and you have light. No electrician, no ceiling access, no landlord permission. The fixture can be disassembled for future moves and reassembled in a new home.

Powder-coated squiggle base: wipe with soft dry microfibre cloth for regular dust; for stubborn marks, slightly damp microfibre with mild dish soap solution then dry immediately. Powder-coat finish resists fingerprints and scratches in normal conditions. Avoid abrasive cleaners, ammonia-based products, or acetone solvents. Fabric drum shade: gently vacuum with a fabric-brush attachment on lowest suction setting to remove dust every 3-6 months. For spot marks or stains, gentle spot-clean with dry-cleaning solvent applied via clean white cloth, blotted gently. Never machine-wash or soak in water (damages internal shade frame). For heavily soiled shades, professional shade cleaning is recommended.

No. The Onda Floor Lamp draws on the broader 1980s postmodern design vernacular associated with the Memphis Group (founded by Ettore Sottsass in Milan in 1981) — the era's design vocabulary treated squiggles and playful geometric forms as expressive statement rather than pure Modernist function. The Onda is not, however, an interpretation of any single specific Memphis Group piece by Sottsass, Michele De Lucchi, George Sowden, or the other Memphis designers, nor is it a reissue authorised by the Memphis Milano archive. It is an independent original design drawing on the era's broader postmodern impulse, updated with a restrained material palette (matte black + natural fabric rather than saturated primary colours + laminate). For authenticated Memphis Group reissues, we recommend consulting the Memphis Milano archive's authorised retailers directly.

Yes — the Onda Floor Lamp is a specified fixture for boutique-hotel guest room corners, hospitality reading lounges, and Airbnb-styled short-term rental units where the sculptural design-forward register reads as considered upscale interior specification. Multi-unit installations across coordinated guest rooms produce visual consistency. Trade programs available; matched-batch shade coordination for multi-fixture installations; project management for larger orders; bulk pricing for orders of 20+ units. Production lead times run 4-6 weeks. Write to support@stuberlighting.com with your project brief — quantity, shade mix (Beige/White/Black), plug region, installation locations, and target timeline.